420280360 715900212 30C3750 AKM Drive CVT Belt fit Outlander Commander Renegade 1000 800 2007 2008 2015 2018

420280360 715900212 30C3750 AKM Drive CVT Belt fit Outlander Commander Renegade 1000 800 2007 2008 2015 2018

Fits Can-am2011+ Commander 800R 1000 / 2006+ Outlander 500 570 650 800 800R 850 1000 1000R / 2008+ Renegade 500 570 800 800R 850 1000 1000R / 2013+ Maverick 1000R
Replaces OEM Part #420280360 / 420280362 / 422280360 / 715000302 / 715900212 / 715900030 / 30C3750 | Outside Circumference: 37.125″ (981mm) / Top Widthy: 1.281″ (33mm) / Height:0.67”(17mm)
Built for high / low temps Developed with a high-temperature compound called DUMAX for added heat resistance (up to 340 ‘F/170). Maximum under-cord stiffness allows the belt to flex for rotational efficiency and running cooler temperatures.
Accurate pitch design Double notch, ensure that AKM carbon CVT drive belt is stressed on both sides reduces wear on one side. Extend service life of the belt.
10000 pounds strength resistance Four-layer Design: High-strength thick rubber, Adhesion Gum, KEVLAR Fiber Stretch-resistant aramid yarn, High and low temperature resistant chloroprene rubber. Make AKM carbon CVT drive belt particularly strong. It can handle more than 10,000 pounds of tension without stretching or breaking.
During break-in period, the following activities should be avoided: Aggressive acceleration or jerky throttle movements at low speeds Holding engine/vehicle speed constant for extended time periods Pulling heavy loads Long run times without complete CVT/belt cool down. AKM BOMBARDIER/CAN-AM/Extreme Badass Drive Belt – Designed for the way you ride
Specs:
Outside Circumference: 37.125″ (981mm); Top Widthy: 1.281″ (33mm); Height:0.67”(17mm)
Package includes:
1 x Carbon Cord G-Force CVT Drive Belt
How To Change The Drive Belt?
Drive belt installation method
1. Turn off the power, remove the protective cover, screw the assembling bolt of the motor, move the motor to loose the belt,remove the old belt. (NOTE: Don’ t pry on the belt. If the belt has excessive wear and tear, that means a problem with the design and maintenance of the transmission.)
2. Choose the suitable belt. Clean the belt and pulley. Wipe the rag with a little non-volatile liquid. The belt must be kept clean before installation and use. (NOTE: Don’ t soak in detergent or scrub with detergent. Dont??t use sandpaper or sharp objects to scrape oil or dirt.)
3. Check whether the pulley is linearly symmetrical and other transmission component.
4. During break-in period, the following activities could be done: Vary vehicle speed and engine RPM to shift belt through normal operational range Do not exceed ? throttle within the first 30 miles of installation Stop engine and allow belt to cool down every 15 minutes of use.
AKM High-tech component for transferring power on ATVs, UTVs, snowmobiles or other powersport equipment.
Replaces OEM Number: 420280360/420280362/422280360/715000302/715900212/715900030/30C3750
NOTE:
1.Wear evenly to reduce belt failure due to edge cord.
2.Amazon filter system and the description may not be 100% accurate or up to date. If you are not sure which belt that your vehicle requires, please touch us directly.